A. full automatic B . lower cost C. high efficiency D. reliable working E. low energy consumption
Material thickness: 1.5 - 3 mm
Size of purlin : 80-300mm
Voltage : 380V/3PH/50HZ
Main Motor : 7.5 KW
Hydraulic Motor : 5.5 KW
Hydraulic Pressure : 10-12MPa
Flattening rollers : 7 rollers
Main forming station : 13 steps
Forming Shaft : diameter 85 mm, 45# steel thermal refining
Roller Material : GCR15 bearing steel quenching HRC58-60°
Main machine body : 350# H steel welded
Transmission : Chain and Sprocket, chain size 2 inch
Wall plate : 20 mm thickness
Blade material : Cr12 mould steel with quenched treatment60-62°
Punch Mould (if needed) : Cr12 quenchedForming Speed : 7-10m/min for standard solution
Hydraulic cutting system : fully automatic . Material of blades: Cr12, quenching treatment.
Specification: 45# steel, CNC Lathes, heat treated 45# steel, roller surfaces polishing, hard plating. The polished surface and the heat treatment towards the molds also can keep the molding. Plate surface smooth and not easy to be marked when it is being stamped . Feature: hard chrome plating, 0.05 mm
specification: 350 H steel. feature: More stable, no shaking
It is used to control the width and position of the steel sheet.The sheet is guided into the machine with correct position, to make sure the panel is neat and parallel.
C Z purlin is good in bending resistance, straightness, and it can cut, punch automatically, it is very easy and convenient to use. It can be used as bearing structure in big and medium sized building, such as factories, warehouses, garages, hangars, gyms, exhibitions, theater and so on.
It is used to support the steel coil and realize the uncoiling by means of rotatory movement. The steel coil is uncoiled manually. The capacity of this uncoiler
is 5 ton, and it is capable for most of the coils.
Receiving the raw material (steel sheet), it guarantees the products are neat, parallel and everything is uniformity.
Electrical control cabinet
PLC is adopted to organize all action of the machine. The length of workpiece is adjustable according to the setting of on the PLC. Two optional control modes:Automatic and manual. By automatic mode, the machine can realize fully automatic working .
Hydraulic oil:40#.Hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job.
A. For this machine need 1*40 GP container to load, one container can load 2 sets machines normally.
B. Make some protection on the machine. We will make the plastic package on the easy damage parts, paint the oil on the roller and shaft, in case the roller and shaft got corrosion and rusty during long time delievery.
C. we will fix all the parts into container by steel wire rope. And ensure the machine will not damage when shaking on sea.
D. we will take phoots and videos for customer when loading to container, so that the customer can take out the machine easily when receive the goods
24 hours service the world ! Your kind inquiry or sample are warmly acceptable !