Single station automatic extrusion blow molding machine
Product Description
Advantages:
1. Low malfunction rate in first 5 years. Life span is over 15 years.
2. With safety light curtain. Guarantee the safety of workers without influencing the auto-running of machine.
3. Equip stainless-steel-blowing tube. To avoid blowing tube can not cooling down which result from the rusting block up the water pipe.
4. Equip thicker linear rolling guide with 65 mm guide rod for the mould station moving. The machine has longer life span than those with 45-50mm guide rod which was used by other factories.
5. Auto-lubrication control system is a creative design which can renew the lubrication oil. Pump out certain volume of lubrication oil to each point. Collecting the used oil for cleaning and environmental friendly, while lengthen the life span of machine.
We are specializing in large blow moulding machine from 200-5000L,1-3layers,1000L one-three layers blow moulding machine,2000L one-three layers blow moulding machine.This machine can produce civil barrel,IBC barrel,220L double L-ring barrel,plastic tray for forklift,underground storage-shaped hollow products.
With this machine you can make water tanks,pallets,roadblocks,and any other plastic products,the capacity from 100L-500L,upto 2 -6layers.Use to produce six-layers oil tank etc.
KHX-500×6 applicable to produce six-layer plastic fuel tanks of high separation capacity and complex shape with HMWHDPE as base layer, EVOH or PA as function layer, and also produce various blow molded products of high separation capacity. Max. Volume of the products is 500L.
SCJC200×6 use to produce various multilayer plastic fuel tanks, and the Max. Volume of the products is 100L.It`s completely meeting the current marketing requirements for fuel tanks with 55L-88L of top grade limousine.
Product Tag Shaped Works Blow Molding Machine(Shaped Works Blow Molding Machine)
Product Categories : Blow Mold Machine > Shaped Works Blow Molding Machine